記事が正常に追加されました。

CSL Pedals Clutch Kit

6,400¥ *

消費税 込み、 送料は別途

即発送可能です。発送まで日数は約1-3営業日です。


機能

  • CSL Pedals のアップグレード
  • 3 つ目のペダルを追加するための最も手頃な方法
  • 重厚なスチール構造 (ペダル フェイスを除く)
  • 非接触型ホール センサー (12 ビット) による高精度および高耐久性の実現
  • ペダルの位置は CSL Pedals のヒールレストに沿って横方向に調整可能
  • 高さが調整可能なペダル フェイス
  • モジュラー設計により、リグへの逆マウントが可能
  • ペダルを壁に固定するための垂直な背面プレート
  • ペダル ベースとアームはパール クローム メッキ仕様

互換性

周辺機器

CSL Pedals と組み合わせることにより、本製品は以下の周辺機器に対応します。

  • すべての CSL Elite ホイールベース
  • CSL DD ホイールベース
  • すべての ClubSport ホイールベース
  • すべての Podium ホイールベース
  • ClubSport USB Adapter

プラットフォーム

  • PC: CSL Pedals Clutch Kit を使用して CSL Pedals をアップグレードしても USB 接続はできないため、ペダルは互換性のある Fanatec 製ホイールベースへと直接接続する必要があります。 独立した入力デバイスとして動作させるには、ClubSport USB Adapter (別売り) または CSL Pedals Load Cell Kit (近日発売予定) をご利用ください。 Load Cell Kit を使用することにより、USB コネクタが追加されます。
  • コンソール: CSL Pedals Clutch Kit を使用してアップグレードした CSL Pedals は、Fanatec ホイールベース/レーシング ホイールを介して接続することにより、家庭用ゲーム機で使用することができるようになります。 コンソールに接続する Fanatec 製品の製品ページに記載されている情報をご確認ください。 ClubSport USB Adapter を使用しているコンソールではご利用いただけません。

特記事項

  • CSL Pedals Clutch Kit は、USB 機能を追加するものではありません。 USB 機能は、ClubSport USB Adapter または CSL Pedals Load Cell Kit でのみ利用可能です。
  • CSL Pedals Clutch Kit は、CSL Pedals Load Cell Kit (近日発売予定) を購入した場合には必要ありません。 Load Cell Kit は標準のブレーキ ペダルの代わりとなり、クラッチ ペダルへと変換することができます。
  • Clutch Kit 付きの CSL Pedals セットは、Load Cell Kit 付きの CSL Pedals へとアップグレードすることができます。

重量

  • 寸法(長さx幅x高さ) 26.4cm x 10.6cm x 37.6cm
  • 含まれるもの 1.2kg
  • 技術仕様 2.1kg

同梱物

  • クラッチ ペダルユニット
  • M4 取り付けボルト x 12 (Clutch Kit をヒールレストに取り付けるためにのみ使用)
  • ルクス レンチ  x 1
  • クイックガイド x 1
評価を読む、書く、議論する... その他
のダウンロード "CSL Pedals Clutch Kit"
類似の商品:

Your wheel base might need a firmware update to use this product. Firmware updates are initiated through the Fanatec Driver, available in the Downloads section on this page. This is a simple process that must be completed using a Windows PC (desktop or laptop). Stay informed about our latest driver releases via the Fanatec forum.

FAQ
My accelerator/throttle/gas pedal is not working on my CSL Pedals. What should I do?

This can happen if the pedals are not connected properly. The cable arrangement is different if you are using the CSL Pedals Load Cell Kit. We have described the cable connections with and without Load Cell Kit below, please follow them carefully: 

 

Without Load Cell Kit: 

Gas pedal to wheel base (Gas 'Wheel Base/Load Cell' port TO 'Pedals' port in the wheel base) 

Brake pedal to Gas pedal (Brake RJ12 connector TO 'Brake' port in Gas pedal) 

 

With Load Cell Kit: 

Load Cell pedal to wheel base (Load Cell 'Wheel Base' port TO 'Pedals' port in the wheel base) 

Gas pedal to Load Cell pedal (Gas 'Wheel Base/Load Cell' port TO 'Load Cell' port in the Load Cell pedal) 

Clutch to Gas pedal (Clutch RJ12 Connector TO 'Clutch' port in the Gas pedal) 

 

CSL Load Cell pedal video guide: https://www.youtube.com/watch?v=7exVV8Quj3U 

 

Warning! Connecting the cables to the wrong ports can damage the electronics and prevent the pedals from functioning. 

 

In case the pedal is still not recognised, please reach out to our Technical Support by opening a support ticket via the My Products section of your Fanatec account. 

その他のよくある質問