Ready to ship
Further links
Features
- Can be used on the gas or brake pedal of the ClubSport Pedals V3
- Can be used on the gas pedal of the ClubSport Pedals V3 inverted
- Provides the feeling of a hydraulic brake
- Adds little mechanical resistance for more realism on the throttle
- Fully adjustable dampening strength by turning a knob
Compatibility
Products
- Compatible to ClubSport Pedals V3 on brake and throttle pedals.
- Compatible to ClubSport Pedals V3 inverted on throttle pedal.
- It is not compatible to any other pedals.
Special Notes
For operation on throttle and brake pedal of the ClubSport Pedals V3 two damper kits are needed.
Packaging Details
- Dimensions (L x W x H) 17cm x 19cm x 5.5cm
- Weight 0.52kg
- Volume weight 0.53kg
What's included
- 1x Damper
- 1x Damper Nut (pre-assembled)
- 1x Pedal Arm Link (pre-assembled)
- 1x Mounting Bracket
- 1x Mounting Screws Bag
- 1x Allen Key
- 1x Quick Guide
Follow these steps to potentially solve the problem:
- Open the Steam application
- Select "View"
- Select "Settings"
- Select "Controller"
- In "General Controller Settings", uncheck the checkbox for "Generic Gamepad Configuration Support".
If the issue persists, reinstall the Steam Client.
There are no differences in resolution of the pedals when connection to either one of the two connectivity types. In terms of functionality, connecting the pedals via RJ12 to the wheel base allows for the Brake Force (BRF) function in the Tuning Menu to be available.
Ensure that only one connection type is in use! Connecting the pedals via both RJ12 and USB at the same time can cause damage to the PCB of the pedal set.
La réponse à cette question est non. Les pédales ont la même résolution lorsqu'elles sont connectées à l'un des deux types de connectivité.
Veuillez noter de ne pas utiliser simultanément les connexions RJ12 vers la roue et USB vers PC. Cela peut causer des problèmes et même endommager le pédalier !
La respuesta a esta pregunta es no. Los pedales tienen la misma resolución cuando se conectan a cualquiera de los dos tipos de conectividad.
Tenga en cuenta que no debe utilizar el cable RJ12 a la base de volante, y el cable USB de conexión al PC al mismo tiempo. ¡Esto puede causar problemas e incluso hacer daño a su set de pedales!
La risposta a questa domanda è No.
I pedali hanno la stessa risoluzione quando sono collegati a uno dei due tipi di connettività. Si prega di notare di non utilizzare entrambe le connessioni RJ12 alla base del volante e USB al PC contemporaneamente. Ciò può causare problemi e persino danneggiare il set dei pedali!
Die Signalauflösung der einzelnen Pedalachsen ist bei beiden Verbindungsarten gleichbleibend. Jedoch kann die Brake Force (BRF) Funktion nur direkt über das Tuning Menü angesteuert werden, wenn die Pedaleinheit direkt an die Wheel Base angeschlossen ist.
Sollten Sie die Pedaleinheit via USB-Anschluss betreiben, so kann die Funktion BRF nur mittels dem FANATEC Control Panel oder über FanaLab angesteuert bzw. Geändert werden.
Bitte beachten Sie, dass Sie niemals gleichzeitig die RJ12 Verbindung zur Wheel Base und die USB-Verbindung zum PC nutzen. Dies kann zu Problemen und sogar Beschädigungen an der Pedalerie führen!