Article successfully added.

ClubSport Handbrake V1.5

€129.95 *

incl. tax
plus shipping and tax (if applicable)

Add accessories
PC This product is compatible with PC. Click label for more details.
PS Ready This product becomes compatible with PlayStation systems when combined with a PlayStation-licensed Wheel Base. Click label for more details.
XBox Ready This product becomes compatible with Xbox One and Xbox Series X|S systems when combined with an Xbox-licensed Steering Wheel. Click label for more details.

Ships within 4-7 days


  • Realistic replica of a handbrake used for drifting in race or rally cars
  • Full metal construction
  • Lever can be mounted in horizontal or vertical position
  • Analog sensor
  • Soft foam grip 
  • Can be used on gaming consoles
  • Flexible mounting options on three sides of the product
  • Can be mounted to a ClubSport Shifter
  • Can be mounted to a ClubSport Shifter Table Clamp using optional adapters



  • PC: The ClubSport Handbrake V1.5 will work in most games, if connected to a Fanatec product with handbrake port. Please check the compatibility details on the product page of the connected product.
  • Consoles: The ClubSport Handbrake V1.5 can be used on gaming consoles in games that support analog handbrakes, if connected through a Fanatec Wheel Base/Racing Wheel. Please check the information on the product page of the Fanatec product through which it will be connected to the console. It will not work on consoles using the ClubSport USB Adapter.


IMPORTANT: To operate the ClubSport Handbrake you must connect it with either one of the following products:

  • ClubSport Pedals V2 / V3 / V3 inverted 
  • CSL Elite Pedals LC/Loadcell Kit
  • CSL Elite Wheel Base
  • CSL Elite Racing Wheel - officially licensed for PS4™
  • ClubSport Wheel Base V2 / V2.5 on the pedal port​ using the included ​handbrake adapter
  • Podium Wheel Base DD1 / DD2
  • ClubSport USB Adapter (optional!): with the adapter you can use it on PC with any racing wheel of any brand in many games. For more details, see the product page of the ClubSport USB Adapter

Special Notes

  • IMPORTANT: This product cannot be operated as a stand-alone product.
  • Do not try to operate two handbrakes at the same time, e.g. by using the wheel base handbrake port and handbrake adapter on pedal port!

Packaging Details

  • Dimensions (L x W x H) 48.5cm x 18cm x 12.5cm
  • Weight 1.5kg
  • Volume weight 2.18kg

What's included

  • ClubSport Handbrake V1.5
  • 3.5mm stereo jack to CSP V2 main PCBA cable (~3 m/9.8 ft) to connect to ClubSport Pedals V2
  • 3.5mm stereo jack to RJ12 cable (~3 m/9.8 ft) to connect to Fanatec Devices with RJ12 Pedal Port, e.g. ClubSport USB Adapter / ClubSport Pedals V3 / CSL Elite Wheel Base
  • ClubSport Handbrake Adapter to ClubSport Wheel Base V1 / V2 / V2.5
  • Quick Guide

Technical Specifications

  • Platform PC, PS4 Ready, XBox One Ready
  • USB Connectivity With optional adapter
  • Sensors Analog
  • Grip material Soft foam
Read, write and discuss reviews... more

Driver (for PC)
You will have to plug the handbrake into a compatible Fanatec product with dedicated handbrake port by cable connection. Following this, there are no individual drivers for this handbrake and the driver of the Fanatec product it are connected to will also support it. Please check and download the concerned driver, e.g. for your Fanatec wheel. 

Drilling template - additional information:

1. When printing the Drilling Template at home, please make sure that the print size is 100% (file size = print size). Therefore deactivate "automatic page scaling" in the print dialog for example.
2. Before drilling the holes, please check if the hole marks on your printed Drilling Template fit to the screw holes of your pedals. 

Wheel bases not recognised in Steam games

Follow these steps to potentially solve the problem:

  1. Open the Steam application
  2. Select "View"
  3. Select "Settings"
  4. Select "Controller"
  5. In "General Controller Settings", uncheck the checkbox for "Generic Gamepad Configuration Support".

If the issue persists, reinstall the Steam Client.

How to connect the ClubSport (CS) Handbrake V1 Wie verbindet man die ClubSport Handbrake?

Depending on the platform you are using there, are different options how the handbrake has to be connected: 

1. PC (using a FANATEC Wheel Base) 

The handbrake can be connected directly to a FANATEC wheel base. The following FANATEC wheel bases have a handbrake port DD1, DD2, GT DD, CSL DD, CSL Elite wheel bases. 

In order to use the handbrake with a ClubSport Wheel Base, you will have to use the included ‘ClubSport Handbrake Adapter to ClubSport Wheel Base V1 / V2 / V2.5’ 

2. PC (using ClubSport USB Adapter) 

Ensure to flash the latest firmware to the ClubSport USB Adapter. This can be done via the "update" tab in the FANATEC Control Panel. Once this is done, please disconnect the adapter. Connect the handbrake to the ClubSport USB Adapter and connect the adapter to the PC. After performing the steps, the handbrake can be used as a separate USB input device. 

3. PC (using ClubSport Pedals) 

In order to make use of the Handbrake via the ClubSport Pedals, you must ensure that the pedals are connected to your PC via USB, and not to the wheel base’s RJ12 input. Connect the handbrake to the ClubSport Pedals main PCBA, and have the pedals connected to your PC via USB. After performing the steps, the handbrake can now be detected as an input signal in your games. 

4. Consoles (PlayStation / Xbox)

Connect the handbrake either via a FANATEC Wheel base to its handbrake port, or via the handbrake input of the ClubSport Pedals V3. If you are connecting the unit via the pedals, the pedals must then be connected to a FANATEC Wheel Base. Connecting to any console only via the ClubSport USB Adapter is not possible. 

Je nach Plattform, die Sie verwenden, gibt es unterschiedliche Anschlussarten für die ClubSport Handbremse: 

1. PC (mit Wheel Base)  

Die Handbremse kann direkt an einer FANATEC Wheel Base angeschlossen werden. Folgende Modelle verfügen über einen Anschluss-Port: PODIUM DD1/DD2, PODIUM Racing Wheel F1, CSL DD, GT DD, CSL Elite Wheel Bases. Für die ClubSport Wheel Bases muss der im Lieferumfang enthaltene Adapter/Splitter verwendet werden! 

2. PC (mit ClubSport USB Adapter)

Zuerst muss auf den CS USB Adapter die richtige Firmware für die Handbremse installiert werden. Der Modus kann über das FANATEC Control Panel geändert werden. Danach stecken sie den Adapter bitte vom PC ab. Nun kann die Handbremse mit dem USB Adapter verbunden werden und der Adapter wird wieder an den PC angeschlossen. Jetzt kann die Handbremse als eigenständiges USB Gerät verwendet werden und muss nur noch im Spiel (welches eine analoge Handbremse unterstützt) richtig belegt/konfiguriert werden. 

3. PC (mit ClubSport Pedals) 

Verbinden Sie die ClubSport Handbremse mit der Hauptplatine der ClubSport Pedals wie im Quick Guide des Produkts beschrieben. Jetzt können die ClubSport Pedale per USB an den PC angeschlossen werden. Die Funktion der Handbremse kann jetzt im FANATEC Control Panel der ClubSport Pedale überprüft werden und muss nur noch im Spiel (welches eine analoge Handbremse unterstützt) richtig belegt/konfiguriert werden. 

4. Konsole (PlayStation und XBOX) 

Schließen Sie die Handbremse entweder an eine FANATEC Wheel Base an oder an eine Pedaleinheit welche über einen Handbrems-Port verfügt.  

Eine Verwendung mittels ClubSport USB Adapter ist nicht möglich, da die Konsolen nicht mehrere USB-Eingabegeräte unterstützen. 

More FAQs