The F Logo on my OLED Display appears scrambled when I start my wheelbase LE LOGO F SUR MON ECRAN OLED APPARAIT BROUILLE LORSQUE JE DEMARRE MA ROUE. CUANDO INICIO MI BASE DE VOLANTE, EL LOGOTIPO “F” EN EL DISPLAY OLED APARECE REVUELTO Il logo F sul mio display OLED appare criptato quando accendo la base del volante. Das „F“-Logo auf meinem OLED Display ist verzerrt/verpixelt beim Starten meiner Wheel Base

Please try the following software solution in order to resolve the issue:

 

  1. 1) Reset your devices by following this guide: https://forum.fanatec.com/discussion/1758/symptom-fanatec-driver-does-not-install-uninstall-correctly
  2. 2) Install the driver package again and update their firmware: https://fanatec.com/eu-en/driver
  3. 3) Open the Firmware Update manager by clicking on the update tab in the Fanatec wheel property page and perform all of the available Firmware Updates

 

In case the procedure above does not help, please reach out to the technical support for further assistance.

 

Veuillez essayer la solution logicielle suivante afin de résoudre le problème :

 

1) Réinitialisez vos appareils en suivant ce guide : https://forum.fanatec.com/discussion/1758/symptom-fanatec-driver-does-not-install-uninstall-correctly

 

2) Installez à nouveau le pack de pilotes et mettez à jour leur firmware : https://fanatec.com/eu-en/driver

 

3) Ouvrez le gestionnaire de mise à jour du micrologiciel en cliquant sur l'onglet de mise à jour dans la page de propriétés de la roue Fanatec et effectuez toutes les mises à jour du firmware disponibles

 

Si la procédure ci-dessus ne vous aide pas, veuillez contacter le support technique pour obtenir de l'aide.

Por favor intente la siguiente solución de software para resolver el problema:
 
1) Restablezca sus dispositivos siguiendo esta guía:
https://forum.fanatec.com/discussion/1758/symptom-fanatec-driver-does-not-install-uninstall-correctly
 
2) Instale el paquete de controladores de nuevo y actualice su firmware: 
https://fanatec.com/eu-en/driver 

3) Realice la actualización del firmware para la base de volante y el controlador del motor a través del Administrador de Actualizaciones de firmware (Firmware Update manager). El administrador de actualizaciones puede indicar que "El firmware está actualizado", en este caso marque en la casilla de verificación "Actualización manual" (Manual Update) en el gestor de actualizaciones de firmware y continuar con la actualización (reinstalación) del firmware.

 En caso de que el procedimiento anterior no ayude, comuníquese con el soporte técnico para obtener más ayuda.

Si prega di provare la seguente soluzione software per risolvere il problema: 

1) Ripristina i tuoi dispositivi seguendo questa guida: https://forum.fanatec.com/discussion/1758/symptom-fanatec-driver-does-not-install-uninstall-correctly 

2) Installa nuovamente il pacchetto driver e aggiorna il firmware: https://fanatec.com/eu-en/driver

3) Aprire il gestore degli aggiornamenti del firmware facendo clic sulla scheda di aggiornamento nella pagina delle proprietà del volante Fanatec ed eseguire tutti gli aggiornamenti del firmware disponibili 

Nel caso in cui la procedura di cui sopra non sia di aiuto, contattare il supporto tecnico per ulteriore assistenza.

Führen Sie bitte die folgenden Schritte durch um das Problem zu beheben:

1) Setzen Sie Ihre Geräte zurück, indem Sie diese Anleitung befolgen: https://forum.fanatec.com/discussion/1758/symptom-fanatec-driver-does-not-install-uninstall-correctly


2) Installieren Sie das Treiberpaket erneut und aktualisieren Sie die Firmware: https://fanatec.com/eu-de/driver


3) Öffnen Sie den Firmware Update Manager indem Sie auf den Tab „Update“ in der Fanatec Wheel Property Page klicken und führen Sie alle verfügbaren Firmware Updates durch.

Sollten die oben genannten Schritte das Problem nicht behoben haben, kontaktieren Sie bitte unseren Technischen Support.