CSL Elite Racing Wheel BMW GT2 for PlayStation
Discontinued
This product is discontinued! There are no units left and there will be no pre-order for this product!
Further links
Features
CSL Elite Wheel Base +:
- Officially licensed for PS4™
- Ultra-strong brushless servo motor which delivers up to 6Nm of torque on the steering axis
- Single belt drive unit with ultra-low lag and cogging, and big ball bearings for lowest friction
- DirectSensor™ on the steering axis to prevent influence of the belt drive on the position sensor
- Very fast steering wheel acceleration
- 1080° of rotation which can be adjusted in the Tuning Menu of the attached steering wheel
- Integrated rev light bar in the wheel base
- Table clamp included. Thickness range of the table board/desktop that the table clamp is able to lock to is 1 to 6 cm
- Firmware can be updated with new features
- Motor driver firmware can also be updated
- Fast 1000 Hz USB update rate
- Allows connection of two external shifters (e.g. H-pattern and sequential) in parallel
- Mount for ClubSport Static Shifter Paddles and other optional accessories
- Connection ports for peripheral devices: USB, Power, Pedals, Shifter 1, Shifter 2, Handbrake
- Choose from a growing selection of very realistic steering wheels in many different styles
- Quick Release system to allow for the easy exchange of steering wheels within seconds, also during gameplay
- Supports Fanatec steering wheel and pedal vibration features
- Supports Fanatec Tuning Menu:
- Saves up to 5 wheel set-ups
- Let the game control the wheel's sensitivity with auto function or adjust the sensitivity independent from the game from 90° to 1080°
- Adjust the strength of the force feedback
- Adjust the sensitivity of steering wheel and pedal vibrations
- Fine-tune the friction of the wheel with the Advanced Drift Mode for added natural dampening or to speed up the wheel for beautiful drifts
- Fine-tune the games' force feedback sensations directly from the steering wheel by adjusting the spring and force effects
- Fine-tune the dampening of the force feedback directly from the steering wheel
- Adjust the sensitivity of the brake pedal (For this feature, Fanatec pedals needs to be connected directly to the wheel base)
- *Tuning functions are subject to change.
ClubSport Steering Wheel BMW GT2:
- Replica of a steering wheel as used in BMW touring cars. The realistic diameter of 320 mm allows precise and smooth inputs
- Officially licensed by BMW
- Durable construction fully made of metal
- Wheel rim made of genuine Italian-made Alcantara®. This material is easy to clean and provides sensational grip
- Steering wheel weight: approx. 2120g (subject to production changes)
- 11 buttons plus two paddle shifter buttons with ultra-reliable switches
- Analogue joystick to look around in the cockpit or to map with any other axis
- 7-way encoder switch to change settings: turn left; turn right; move left, right, up and down; push (active in Tuning Menu and compatible with any PC game)
- Two vibration motors integrated to the wheel rim, controllable through wheel Tuning Menu or by game through Fanatec SDK
- LED bar to show motor RPM
- LED display to show telemetry functions. Works with several popular PC games such as iRacing and rFactor 2
- Adjustable and detachable paddle shifters completely made of metal. Adjust angle, distance to rim and travel of the paddles
- Tuning Menu functions with LED display to adjust settings independent from the game and during gameplay (see description of compatible wheel base/racing wheel for details)
Compatibility
Peripherals
- All Fanatec Steering Wheels
- All Fanatec Pedals
- All Fanatec Shifters
- Fanatec ClubSport Handbrake
- RennSport Cockpit V2 (sold after Q4 2017)
- ClubSport Table Clamp V2
Platforms
- PC: This wheel base is compatible with PC in combination with all available steering wheels.
- Xbox One® and Xbox Series X: The CSL Elite Racing Wheel BMW GT2 is not compatible with Xbox One® and Xbox Series X. However, Xbox One and Xbox Series X compatibility can be achieved by attaching a Fanatec Xbox One licensed Steering Wheel to the wheel base.
- PlayStation®: All PlayStation®4 and PlayStation® Pro systems. For a complete list of compatible games please visit this page.
PlayStation 5: Check our platform compatibility page for more details. - Please check the product description sites of the contained products for detailed information about individual compatibility.
What's included
- CSL Elite Wheel Base +
- Table clamp
- Table clamp screw with handle
- Power supply unit (cable length: power supply to wheel base 1,5 m/6 ft)
- Power cord (regional) (cable length: socket to power supply 1,5 m/6 ft.)
- USB connection cable (2 m/6 ft.)
- O-Ring (spare for Quick Release shaft)
- PS4™ button caps for ClubSport steering wheels
- ClubSport Steering Wheel BMW GT2
- Safety pin for long storage
- Safety screw for permanent mount
- Quick Guides
Technical Specifications
- Platform PC, PS4, XBox One Ready
Follow these steps to potentially solve the problem:
- Open the Steam application
- Select "View"
- Select "Settings"
- Select "Controller"
- In "General Controller Settings", uncheck the checkbox for "Generic Gamepad Configuration Support".
If the issue persists, reinstall the Steam Client.
In case the Power LED starts pulsating as soon as you attach the steering wheel, please check the following:
1) We have to make sure that we have the latest driver package installed and that our firmware is up to date. Please know that our latest steering wheels require the latest driver package and firmware for your base in order to be recognized. To download the driver, please go to the following page: https://fanatec.com/eu-de/driver
Once downloaded, please install it and proceed with the firmware updates
2) Inspect the pins at the back of the steering wheel as well as the hub of the wheelbase for any damage. (You will probably notice that one of the pins is shorter than the others. This is nothing to worry about. The shorten pin is left like this on purpose). In case you spot any damage, please make sure to reach out to our technical support team.
3) Loosen and then moderately retighten the screws located at the back of the steering wheel, around the pins and also the one in the middle.
In case none of the steps above help and you still get the pulsating power LED, please reach out to our technical support team. They will be able to assist you further.
Si la LED d'alimentation commence à clignoter dès que vous attachez le volant, veuillez vérifier le suivant :
1) Nous devons nous assurer que nous avons le dernier pack de pilotes installé et que notre firmware est à jour
Sachez que nos derniers volants nécessitent le dernier pack de pilotes et le dernier firmware pour votre base afin d’être reconnu. Pour télécharger le pilote, veuillez-vous rendre sur la page suivante :
https://fanatec.com/eu-de/driver
Une fois téléchargé, veuillez l'installer et procéder aux mises à jour du firmware
2) Inspectez les pins à l'arrière du volant ainsi que le moyeu de la base pour tout dégât. (Vous remarquerez probablement que l'un des pins est plus court que les autres. Il n'y a pas de quoi s'inquiéter. Le pin raccourci est laissé comme ça exprès). Si vous constatez des dégâts, assurez-vous de contacter notre équipe d'assistance technique.
3) Desserrer puis resserrer modérément les vis situées à l'arrière du volant, autour des pins et aussi celle du milieu.
Si aucune des étapes ci-dessus ne vous aide et que vous obtenez toujours le voyant d'alimentation clignotant, veuillez contacter notre équipe d'assistance technique. Ils pourront vous aider davantage.
En caso de que la luz LED de encendido en la base comience apenas conecte el volante, por favor verifique lo siguiente:
1) Tenemos que asegurarnos de que tenemos el paquete de controladores (driver) actual instalado, y que nuestro firmware está actualizado. Tenga en cuenta que nuestros volantes más recientes requieren el último paquete de controladores y firmware para su base para poder ser reconocidos. Para descargar el controlador, vaya a la siguiente página: https://fanatec.com/eu-de/driver
Una vez descargado, instálelo y continúe con las actualizaciones de firmware sugeridas.
2) Inspeccione los pines conectores en la parte posterior del volante, así como el conector de su base para verificar que no haya algún daño. (Probablemente notará que uno de los pines es más corto que los otros. Esto no es nada de lo que preocuparse. El perno acortado es más corto a propósito). En caso de que detecte algún daño, asegúrese de comunicarse con nuestro equipo de soporte técnico.
3) Afloje y luego moderadamente reapriete los tornillos ubicados en la parte posterior del volante, alrededor de los pines y también el del centro.
En caso de que ninguno de los pasos anteriores ayude y la luz LED de encendido aún esté parpadeando, comuníquese con nuestro equipo de soporte técnico. Ellos serán capaces de ayudarle aún más.
Nel caso in cui il LED di alimentazione inizi a lampeggiare non appena si collega il volante, controllare quanto segue:
1) Assicurarsi di avere installato il pacchetto driver più recente e che il nostro firmware sia aggiornato. Tieni presente che i nostri ultimi volanti richiedono il pacchetto driver e il firmware più recenti per la tua base, per essere riconosciuti. Per scaricare il driver, vai alla seguente pagina: https://fanatec.com/eu-de/driver Una volta scaricato, installalo e procedi con gli aggiornamenti del firmware
2) Ispezionare i perni sul retro del volante e il mozzo del base per eventuali danni. (Probabilmente noterai che uno dei perni è più corto degli altri. Non c'è nulla di cui preoccuparsi. Il perno accorciato è lasciato apposta così). In caso di danni, assicurati di contattare il gruppo di Supporto Tecnico.
3) Allentare e poi riavvitare moderatamente le viti poste sul retro del volante, attorno ai perni e anche quella centrale.
Nel caso in cui nessuno dei passaggi precedenti sia d'aiuto e continui a visualizzare il LED di alimentazione pulsante, contatta il gruppo di Supporto Tecnico. Saranno in grado di aiutarti ulteriormente.
Sollte die Power LED pulsierend aufleuchten, wenn Sie ihr Lenkrad anschließen, prüfen Sie bitte folgendes:
1) Wir müssen sicherstellen, dass Sie das aktuellste Treiberpaket installiert haben und die Firmware auf allen Produkten aktualisiert haben. Bitte beachten Sie, dass unsere neuesten Lenkräder immer die aktuellste Firmware auf der Base installiert benötigen, da die Lenkräder sonst nicht erkannt werden können. Um den Treiber herunterzuladen, folgen Sie diesem Link:
https://fanatec.com/eu-de/driver
Sobald Sie die Datei heruntergeladen haben, installieren Sie diese und fahren mit den Firmware-Updates fort.
2) Prüfen Sie die Pins im Quick Release Connector des Lenkrads auf Beschädigungen. (Sie werden vermutlich bemerken, dass einer der Pins kürzer ist als die anderen. Dies ist vollkommen normal und der Pin ist absichtlich kürzer). Sollten Sie eine Beschädigung an den Pins erkennen können, kontaktieren Sie bitte unseren Technischen Support.
3) Lockern und ziehen Sie die Schrauben rund um die Pins im Connector (und die kleine Schraube mittig der Pins) anschließend wieder mäßig an.
Sollten die oben genannten Schritte keine Besserung bringen und Sie immer noch die pulsierende Power LED an der Base sehen, kontaktieren Sie bitte unseren Technischen Support.
Such an issue can occur if you interrupt the firmware update procedure and can lead to bricking your base. Please make sure to never switch off your wheelbase during firmware updates.
In order to try to reflash the base and get it back to its proper working state. Please try the following:
- 1) Install the following driver package: https://fanatec.com/eu-en/driver
- 2) While your wheelbase is connected to your PC via the USB and it is turned off, press and hold the power button for 10 seconds in order to get the wheelbase into bootloader mode. Please attempt the firmware update.
In case the base is not able to go into bootloader mode and firmware update is not possible, then we would suggest having the base checked in our workshop.
Please reach out to our technical support for further assistance.
Si la LED d'alimentation commence à clignoter dès que vous attachez le volant, veuillez vérifier le suivant :
1) Nous devons nous assurer que nous avons le dernier pack de pilotes installé et que notre firmware est à jour
Sachez que nos derniers volants nécessitent le dernier pack de pilotes et le dernier firmware pour votre base afin d’être reconnu. Pour télécharger le pilote, veuillez-vous rendre sur la page suivante :
https://fanatec.com/eu-de/driver
Une fois téléchargé, veuillez l'installer et procéder aux mises à jour du firmware
2) Inspectez les pins à l'arrière du volant ainsi que le moyeu de la base pour tout dégât. (Vous remarquerez probablement que l'un des pins est plus court que les autres. Il n'y a pas de quoi s'inquiéter. Le pin raccourci est laissé comme ça exprès). Si vous constatez des dégâts, assurez-vous de contacter notre équipe d'assistance technique.
3) Desserrer puis resserrer modérément les vis situées à l'arrière du volant, autour des pins et aussi celle du milieu.
Si aucune des étapes ci-dessus ne vous aide et que vous obtenez toujours le voyant d'alimentation clignotant, veuillez contacter notre équipe d'assistance technique. Ils pourront vous aider davantage.
En caso de que la luz LED de encendido en la base comience apenas conecte el volante, por favor verifique lo siguiente:
1) Tenemos que asegurarnos de que tenemos el paquete de controladores (driver) actual instalado, y que nuestro firmware está actualizado. Tenga en cuenta que nuestros volantes más recientes requieren el último paquete de controladores y firmware para su base para poder ser reconocidos. Para descargar el controlador, vaya a la siguiente página: https://fanatec.com/eu-de/driver
Una vez descargado, instálelo y continúe con las actualizaciones de firmware sugeridas.
2) Inspeccione los pines conectores en la parte posterior del volante, así como el conector de su base para verificar que no haya algún daño. (Probablemente notará que uno de los pines es más corto que los otros. Esto no es nada de lo que preocuparse. El perno acortado es más corto a propósito). En caso de que detecte algún daño, asegúrese de comunicarse con nuestro equipo de soporte técnico.
3) Afloje y luego moderadamente reapriete los tornillos ubicados en la parte posterior del volante, alrededor de los pines y también el del centro.
En caso de que ninguno de los pasos anteriores ayude y la luz LED de encendido aún esté parpadeando, comuníquese con nuestro equipo de soporte técnico. Ellos serán capaces de ayudarle aún más.
Nel caso in cui il LED di alimentazione inizi a lampeggiare non appena si collega il volante, controllare quanto segue:
1) Assicurarsi di avere installato il pacchetto driver più recente e che il nostro firmware sia aggiornato. Tieni presente che i nostri ultimi volanti richiedono il pacchetto driver e il firmware più recenti per la tua base, per essere riconosciuti. Per scaricare il driver, vai alla seguente pagina: https://fanatec.com/eu-de/driver Una volta scaricato, installalo e procedi con gli aggiornamenti del firmware
2) Ispezionare i perni sul retro del volante e il mozzo del base per eventuali danni. (Probabilmente noterai che uno dei perni è più corto degli altri. Non c'è nulla di cui preoccuparsi. Il perno accorciato è lasciato apposta così). In caso di danni, assicurati di contattare il gruppo di Supporto Tecnico.
3) Allentare e poi riavvitare moderatamente le viti poste sul retro del volante, attorno ai perni e anche quella centrale.
Nel caso in cui nessuno dei passaggi precedenti sia d'aiuto e continui a visualizzare il LED di alimentazione pulsante, contatta il gruppo di Supporto Tecnico. Saranno in grado di aiutarti ulteriormente.
Die Power-LED bleibt nur an, solange der Power Button gedrückt wird. Die Wheel Base startet nicht. Warum?
Ein solcher Fehler kann auftreten, wenn das Firmware Update unterbrochen wurde und kann zum ‚bricken‘ der Base führen. Stellen Sie sicher, die Wheel Base niemals während eines Updates auszuschalten oder die USB Verbindung zu trennen.
Um die Wheel Base Firmware erneut zu flashen und die Base dadurch wieder funktionstüchtig zu machen, folgen Sie bitte den folgenden Schritten:
1) Installieren Sie dieses Treiberpaket: https://fanatec.com/eu-de/driver
2) Während Ihre Wheel Base per USB mit Ihrem PC verbunden ist, drücken und halten Sie den Power Button für mindestens 10 Sekunden um die Base in den Bootloader Mode zu versetzen. Versuchen Sie dann das Firmware Update durchzuführen.
Sollte die Wheel Base sich nicht in den Bootloader Mode versetzen lassen und ein Firmware Update nicht möglich ist, sollte das Produkt in unserer Werkstatt inspiziert werden.
Kontaktieren Sie dann bitte unseren Technischen Support.