Please note: Estimated availability dates and delivery speeds are currently affected by the global pandemic. This may have an impact on your order.
Article successfully added.

CSL DD (5 Nm)

€349.95 *

incl. VAT
plus shipping costs

Add accessories
Configure your setup
PC This product is compatible with PC. Click label for more details.
XBox Ready This product becomes compatible with Xbox One and Xbox Series X|S systems when combined with an Xbox-licensed Steering Wheel. Click label for more details.

Open for Pre-Orders
Availability date: Jul 15, 2022


Features

  • Direct-Drive system delivers instant, detailed force feedback
  • Linear, consistent performance (5 Nm peak torque)
  • Optional Boost Kit 180 (sold separately) unlocks maximum strength (8 Nm peak torque)
  • Patented, exclusive FluxBarrier technology optimises motor efficiency and smoothness
  • Full Fanatec SDK support ensures game compatibility out of the box for all major racing games
  • Standard Tuning Menu allows beginners to get started quickly without having to worry about settings
  • Advanced Tuning Menu allows enthusiasts to fine-tune the force feedback characteristics to suit their driving preferences
  • High-resolution (contactless) Hall-position-sensor, same as Podium Series
  • Steering axis made from carbon fibre-enhanced composite
  • Fanless: wheel base housing is made from aluminium (passive heat sink, core structural component) with composite end caps
  • Rotation: 2520 degrees (electronically limited, adjustable)
  • Slip ring system (life-tested for thousands of hours) provides cable-free delivery of power and data to steering wheels
  • Automotive-grade quick release, exchangeable
  • T-nut rail system on sides and bottom for easily adjustable hard-mounting
  • Optional table clamp (sold separately), supports 5 to 60 mm table thickness
  • Ports:
    • Power supply
    • USB-C to PC / console
    • Fanatec DataPort-C
    • Shifter 1
    • Shifter 2 (Sequential only)
    • Pedal
    • Handbrake
  • Front-mounted threaded inserts for Fanatec accessories (e.g. ClubSport Static Shifter Paddles, available separately). Not intended for front-mounting the wheel base to a sim racing chassis/cockpit.

Compatibility

Peripherals

The CSL DD is compatible with:

  • Fanatec Podium Steering Wheels 
  • Fanatec ClubSport Steering Wheels
  • Fanatec CSL Steering Wheels
  • All Fanatec Pedals (adapter cables might be required on pedals without RJ12 connection)
  • Fanatec ClubSport Shifters (including ClubSport Static Shifter Paddles)
  • Fanatec ClubSport Handbrake V1 and V1.5
  • Fanatec RennSport Cockpits
  • ClubSport Table Clamp V2
  • CSL DD Table Clamp
  • Boost Kit 180
  • Podium Mounting Brackets (the CSL DD includes M6 T-nuts for side-mounting; the Podium Mounting Brackets require the use of M6 bolts and washers)

Platforms

  • PC: This wheel base is compatible with PC when combined with a Fanatec Steering Wheel. Check the individual Steering Wheel product pages for Wheel Base compatibility.
  • Xbox®: This wheel base becomes compatible with Xbox One® and Xbox Series X|S when used with any Fanatec Xbox-licensed steering wheel.
  • PlayStation®: This product is not compatible with any PlayStation® console and cannot be upgraded to achieve compatibility.

Special Notes

  • Not suitable for children. A Direct Drive Wheel Base is not a toy! The fast movements of the steering wheel and strong torque can be dangerous. Please read the safety instructions.
  • In order to enable features such as Steering Wheel LEDs in some titles, it may be necessary to switch the CSL DD to Compatibility Mode. This can also help with titles not working in standard PC mode. Check the Quick Guide for details.
  • Only the standard 90W power supply or the Boost Kit 180 can be used with this wheel base. The use of any other power supply will void the wheel base warranty, is potentially dangerous and can lead to serious injury or death.

Packaging Details

  • Dimensions (L x W x H) 38cm x 29cm x 25cm
  • Weight 6.85kg
  • Volume weight 5.51kg

What's included

  • CSL DD wheel base
  • 90W power supply (regional)*
  • 4x T-nuts for rail mount system
  • USB cable (Type-C to Type-A)
  • Quick Guide

*If you select the Boost Kit 180 (180W power supply), the standard power supply is not included.


Technical Specifications

  • Platform PC, XBox One Ready
Read, write and discuss reviews... more
FAQ
Fanatec compatibility to Logitech and Thrustmaster hardware

We are often asked if you can use Thrustmaster or Logitech wheels, pedals, shifters or other accessories in combination with Fanatec hardware. In general the devices of different vendors are not compatible to each other. Therefore, you cannot directly connect products from different companies to each other or at least this is not supported.

In former times there have been adapters which might have worked to make such combinations possible but those solutions have not been reliable due to different techniques used in the hardware and different signal tolerances even if similar specs have been used. Fanatec cannot make any statements about third party adapters or similar solutions. We are putting a lot of effort into the goal of having the highest possible intercompatibility in between all our devices, which is not that easy to achieve. For any questions about compatibility we can only direct you to the information given on our product pages or within our FAQs.

 

The statement above is valid for every platform (especially on consoles!) EXCEPT PC...since you can connect multiple, individual USB devices there IF the game/simulation supports that.
This gives you multiple options to combine hardware of different vendors the way you want. Most simulation games on Windows PCs will allow you to use combinations like: Logitech wheel, Thrustmaster shifter and Fanatec pedals for example. Since Fanatec provides USB solutions for more or less every kind of hardware (shifter/handbrake by USB adapter, USB pedals, USB wheels, etc.) the possibilities to build your perfect setup are endless. 

Even if it is very common, please be so kind to make some research on the web or ask the simulation developer if multiple USB devices are supported.

How to connect a wheel base to the Xbox One Anschließen einer Wheel Base an die Xbox One

In order to use your wheelbase on Xbox One, you will need an officially Xbox One licensed steering wheel.

The officially Xbox One-licensed Fanatec Steering Wheels are:

CSL Elite P1 Xbox One
https://fanatec.com/eu-en/steering-wheels/csl-elite-steering-wheel-p1-for-xbox-one

CSL Elite McLaren GT3

Discontinued

ClubSport Steering Wheel Universal Hub for Xbox one V2
https://fanatec.com/eu-en/steering-wheels/clubsport-universal-hub-v2-for-xbox

Club Sport Steering Wheel Formula V2.5x

https://fanatec.com/eu-en/steering-wheels/clubsport-steering-wheel-formula-v2.5-x

and CSL Elite Steering Wheel WRC.

https://fanatec.com/eu-en/steering-wheels/csl-elite-steering-wheel-wrc

 

The wheel base must be connected to the console via USB. All peripherals, like the CSL Elite Pedals Load Cell Kit, ClubSport Pedals V3 and ClubSport Pedals V3 Inverted, ClubSport Shifter and the ClubSport Handbrake, must be connected to the wheel base directly via the RJ12 cable only and not to the console.

There is no wireless connection for force feedback steering wheels on Xbox One. This is due to the specifications of the Xbox One and no limitation of the hardware from our side.

Attach one of those wheels to your wheelbase. If the wheel base is in PC mode, simultaneously press and hold the two buttons to change modes in order to switch to Xbox One mode. Please check the manual for the required combination for each wheel to switch modes. The drivers and manuals can be found in the “Downloads” section on each product page.

Please remember to (always) update your wheel base to the latest firmware version before you attach a new rim!

The newest firmware is always included in the latest driver for your product. You are required to connect your hardware to a PC to do the update.

Um Ihre Fanatec Wheel Base auf Xbox One nutzen zu können, benötigen Sie ein offiziell für Xbox One lizenziertes Fanatec Lenkrad.

 

Die offiziell Xbox One-lizenzierten Fanatec-Lenkräder sind:

 

CSL Elite P1 Xbox One

https://fanatec.com/eu-en/steering-wheels/csl-elite-steering-wheel-p1-for-xbox-one

 

CSL Elite McLaren GT3

Verkauf eingestellt

 

ClubSport Lenkrad Universal Hub für Xbox One

https://fanatec.com/eu-en/steering-wheels/clubsport-steering-wheel-universal-hub-for-xbox-one

 

ClubSport Lenkrad Formel V2

https://fanatec.com/eu-en/steering-wheels/clubsport-steering-wheel-formula-v2

 

und CSL Elite Steering Wheel WRC

https://fanatec.com/eu-en/steering-wheels/csl-elite-steering-wheel-wrcc

 

DieWheel Base muss über USB an die Konsole angeschlossen werden. Alle Peripheriegeräte, wie das CSL Elite Pedale Load Cell Kit, ClubSport Pedale V3 und ClubSport Pedale V3 Inverted, ClubSport Shifter und die ClubSport Handbremse, müssen nur über das RJ12-Kabel direkt an die Wheel Base und nicht an die Konsole angeschlossen werden.

 

Es gibt keine drahtlose Verbindung für Force-Feedback-Lenkräder auf der Xbox One. Dies ist auf die Spezifikationen der Xbox One zurückzuführen und keine Einschränkung der Hardware von unserer Seite.

 

Befestigen Sie eines dieser Lenkräder an Ihre Wheel Base. Wenn sich die Wheel Base im PC-Modus befindet, drücken und halten Sie gleichzeitig die beiden Tasten, um den Modus zu wechseln und in den Xbox One-Modus zu wechseln. Bitte lesen Sie in der Anleitung nach, welche Kombination für jedes Lenkrad zum Umschalten der Modi erforderlich ist. Die Treiber und Anleitungen finden Sie im Abschnitt "Downloads" auf jeder Produktseite.

 

Bitte denken Sie daran, Ihre Wheel Base (immer) auf die neueste Firmware-Version zu aktualisieren, bevor Sie ein neues Lenkrad montieren!

 

Die neueste Firmware ist immer im neuesten Treiber für Ihr Produkt enthalten. Um das Update durchzuführen, müssen Sie Ihre Hardware an einen PC anschließen.

Why does my wheel not stop perfectly centered after starting the device? Warum stoppt mein Lenkrad nicht perfekt in der Mitte nachdem ich es starte? Why does my wheel not stop perfectly centered after starting the device?

When the wheelbase is powered on, it begins its startup routine in order to check its functions and connectivity. Once completed, the wheel comes to a stop in a centered position once the wheel base center has been calibrated. Please note it is normal for the wheelbase to not return to its perfect centered position (‘’0’’). The various tuning menu settings can affect this; it does not indicate an issue with your hardware.

For proper centering, please use our PC driver or the telemetry functions in the game on your console. If the wheel is not perfectly centered (showing the 0-position in the software when the physical wheel is moved to the center position) please "calibrate the wheel center" with the button combination mentioned in the FAQs, in the Quick Guide or in the (video) manual. 

Please keep in mind that you could accidently calibrate the wheel 360° off the real wheel center, as our 900° wheels pass the center position 3 times if you turn it through its full range of movement!



Die Startroutine ist nötig um die Grundfunktionen des Lenkrades zu testen und zu initialisieren. Es ist nicht nötig, dass das Lenkrad perfekt zentriert (in der 0-Position) zum stehen kommt. Bitte denken sie daran, dass die Position in der das Lenkrad nach der Startsequenz stehen bleibt von verschiedenen Einstellungen im Tuning Menu beeinflusst werden kann. Die wird allerdings nicht die wirkliche Nullstellung beeinflussen welche sie in der verwendeten Software (PC / Spiel / Treiber) sehen können.

Um die korrekte Zentrierung zu überprüfen verwenden sie bitte unseren PC Treiber oder die Telemetriedaten des verwendeten Spiels auf ihrer Konsole. When das Lenkrad nicht perfekt zentriert ist (und nicht in der Software die O-Position zeigt wenn das Lenkrad in seiner physischen Mittelstellung ist) so kalibrieren sie bitte das Lenkrad ("calibrate wheel center") so wie in den FAQs, im (Video) Handbuch oder in Quickguide beschrieben.

Bitte denken sie daran, dass sie die Nullstelle versehentlich um 360° falsch kalibrieren könnten, da unsere 900° Lenkräder diese Position im gesamtem Lenkbereich 3 mal überschreiten!

ホイールベースがセンタリングされていない

ホイールベースの電源がオンになると、ホイールベースの機能と接続性をチェックするために起動ルーチンを開始します。そのチェックが停止した際、ホイールベースは中央の位置に戻ります(ホイールベースが中央で調整されたと)。ホイールベースが完全な中心(「0」)に戻らないのは正常であることに注意してください。さまざまなチューニングメニュー設定がこれに影響を与える可能性があり、心配する必要はありません。適切なセンタリングを確認するには、PCドライバまたはコンソールのゲームのテレメトリ機能を使用してください。ホイールが完全に中央に戻らない場合(物理的なホイールが中央位置に移動したときにソフトウェアで0の位置が表示されます)、FAQ、クイックガイド、または(ビデオ)に記載されているボタンの組み合わせで「ホイールの中心を調整」してください。 )マニュアル。 (リンク)900°ホイールが全可動範囲で回転すると、900°ホイールが中心位置を3回通過するため、実際のホイール中心から360°離れたホイールを誤って調整する可能性があることに注意してください。

More FAQs

Accessories