Article successfully added.

CSL Elite Pedals Load Cell Kit

€109.95 *

incl. tax
plus shipping and tax (if applicable)

This product is sold out.

This product is discontinued! There are no units left and there will be no pre-order for this product!


  • Extends CSL Elite Pedals for a loadcell brake and uses the former brake unit as clutch pedal
  • The whole pedal arm is a load cell sensor
  • Pedal pressure up to 90 kg
  • Pedal unit made from Aluminum
  • Adjustable brake force by PC driver software or Wheel Base tuning menu
  • Adjustable brake resistance and travel by exchangable Elastomer springs. No tools needed.
  • Detachable rubber pedal covers offer good grip and softer pedal surface
  • Applicable anti-skid-pads (3) for the pedal surface offer a perfect grip for racing shoes
  • USB connection to PC
  • Direct connection to Fanatec Wheel Bases and Wheels
  • Dedicated port for ClubSport Handbrake



  • PC:
    • If you connect it to a Fanatec Wheel Base / Racing Wheel it will be compatible to all racing games. For that case, please check the compatibility details on the product page of the connected product.
    • It will work with any racing wheel, also of​ any other brand (Logitech, Thrustmaster, etc), if the pedals are connected to PC via USB and if the game supports a second controller. ​E.g. these PC games support a second USB controller:
      • iRacing
      • Assetto Corsa
      • Project Cars
      • GTR 2
      • Race 07
      • rFactor
      • Live for Speed
      • ...and many others
  • Consoles: This pedal set can be used on gaming consoles, if connected through a Fanatec Wheel Base / Racing Wheel. Please check the information on the product page of the Fanatec product through which they will be connected to the console. It will not work on consoles using the direct USB Connection or a ClubSport USB Adapter.


  • CSL Elite Pedals (mandatory)
  • Compatible to any Fanatec Wheel Base or Racing Wheel with RJ12 Pedals connector. This does not include the Porsche and CSR wheel series.
  • With installed Loadcell Kit, the pedals are not compatible to the ClubSport USB Adapter. Please use the included USB connector (PC only).

Special Notes

  • IMPORTANT: The CSL Elite Pedals Loadcell Kit cannot be operated as a stand-alone product and requires the CSL Elite Pedals.
  • Slight colour variations may occur between CSL Elite Pedals and CSL Elite Pedals Loadcell Kit.
  • Max resolution depending on the connection:
    • through CSW B V1 / CSW B V2 / CS WB V2.5 / CSL E WB / CSL E RW PS4: 12 bit (4096 values) on all axes
    • USB direct connection (PC): brake 16 bit (65536 values) / clutch and throttle: 12 bit (4096 values)

Because this product is no longer manufactured, and this Anniversary Sale represents the last units that will ever be available to purchase, it may not be possible to provide our normal RMA service. If a warranty claim is necessary, we will try to repair the product, but in some cases where this is not possible, you will be offered an appropriate alternative.

Packaging Details

  • Dimensions (L x W x H) 33cm x 33cm x 14cm
  • Weight 2.2kg
  • Volume weight 3kg

What's included

  • Loadcell brake unit
  • Loadcell Kit electronics
  • 1x clutch limiter pad
  • 1x USB cable (~3m)
  • 1x rubber pedal cover (detachable)
  • 3x pedal plate anti-skid pad (self adhesive)
  • Elastomer springs with various shore hardness
  • 2x pedal unit stabilizer bars
  • 1x Allen Key 2 mm
  • 1x Quick Guide
  • Mounting screws
Wheel bases not recognised in Steam games

Follow these steps to potentially solve the problem:

  1. Open the Steam application
  2. Select "View"
  3. Select "Settings"
  4. Select "Controller"
  5. In "General Controller Settings", uncheck the checkbox for "Generic Gamepad Configuration Support".

If the issue persists, reinstall the Steam Client.

Can I use my CSL Elite Loadcell kit without the foam ring? Titre : Puis-je utiliser mon CSL Elite Loadcell kit sans l'anneau en mousse ? ¿Puedo utilizar mi CSL Elite Loadcell kit sin el aro de esponja? Posso usare il mio kit CSL Elite Loadcell senza l'anello in spugna? Kann ich mein CSL Elite Pedals Loadcell Kit ohne den Schaumstoff Ring benutzen?


The CSL Elite Loadcell Kit Pedal should only be used as shown in the manual, and described below:  

  • 5 Rubber shores (65, 85 or 95)  
  • Foam Ring  
  • 5 washers (one after each rubber shore and foam ring)  
  • one bushing  
  • end stop 

This is also illustrated on the image in the product page linked below:  



The loadcell pedal is designed to be used as illustrated above. Replacing the foam ring with another rubber shore in order to make the load cell more sensitive can cause damages to the shores, and pedal itself. Should this happen, we will not be able to cover any spare parts or repair fees under warranty.   


Le CSL Elite Loadcell kit doit être utilisé uniquement comme indiqué dans le manuel. 


5 rives en caoutchouc (65, 85 ou 95) + Anneau mousse + 5 rondelles (une après chaque rive en caoutchouc et Anneau mousse) + une douille + butée. La séquence est également montrée dans l'image ci-dessous (elle peut également être trouvée sur la page produit du CSL Elite LoadCellKit : 


Sachez que la pédale LoadCell Kit est conçue pour être utilisée comme indiqué et expliqué ci-dessus. Par conséquent, le remplacement de la mousse PU par une autre rive en caoutchouc, afin de rendre la pédale plus sensible, peut l'endommager et elle ne sera pas couverte par la garantie en cas de dommages sur le LoadCell Kit ou la pédale elle-même.

El kit CSL Elite Loadcell debe utilizarse únicamente como se muestra en el manual. 
5 partes de goma o elastómeros (65, 85 o 95) + 1 aro de espuma PU + 5 empaques o arandelas (una después de cada elastómero y anillo de espuma) + un buje + un tope final. La secuencia también se muestra en la imagen de abajo (también se puede encontrar en la página del producto del kit CSL Elite LoadCell : 



Tenga en cuenta que el pedal de la célula de carga está diseñado para ser utilizado como se muestra y se explicó anteriormente. Por lo tanto, la sustitución de la espuma de PU por otra orilla de goma, con el fin de hacer que el pedal sea más sensible, puede dañarlo, y no estaría cubierto por la garantía en caso de que se produzcan daños en la célula de carga o en el mismo pedal.   

Il kit CSL EliteLoadcell deve essere utilizzato solo come mostrato nel manuale.  

5 puntelli in gomma (65, 85 o 95) + anello in spugna + 5 rondelle (una dopo ogni puntello in gomma e anello in schiuma) + una boccola + battuta finale.La sequenza è mostrata anche nell'immagine sottostante (si trova anche nella pagina prodotto del kit CSL EliteLoadCell  


Tieni presente che il pedale della cella di carico è progettato per essere utilizzato come mostrato e spiegato sopra.Pertanto, la sostituzione della spugna in PU con un altro puntello in gomma, al fine di rendere il pedale più sensibile, può danneggiarlo e non sarà coperto dalla garanzia nel caso in cui si verifichino danni alla cella di carico o al pedale stesso.

Das CSL Elite Pedals Loadcell Kit sollte nur so verwendet werden, wie im Manual dargestellt. 

  • 5 Elastomerfedern (65, 85 oder 95)
  • Schaumstoff Ring
  • 5 Beilagscheiben (eine nach jeder Elastomerfeder und dem Schaumstoff Ring)
  • Kappe
  • End Stop

Die Reihenfolge ist im Bild unten (Kann ebenfalls auf der Produktseite des CSL Elite Pedals Loadcell Kit zu sehen: 


Bitte beachten Sie, dass das Loadcell Pedal darauf ausgelegt ist, nur so wie oben beschrieben verwendet zu werden. Daher kann das Ersetzen des Schaumstoff Rings durch eine weitere Elastomerfeder um mehr Sensitivität zu erlangen, das Pedal oder die Loadcell beschädigen. Ein durch diese Modifikation entstandener Schaden wird nicht durch die Garantie abgedeckt. 

More FAQs