Please note: Estimated availability dates and delivery speeds are currently affected by the global pandemic. This may have an impact on your order.
Article successfully added.

CSL Elite Pedals

$149.90 *

incl. GST
plus shipping costs

Add accessories
Configure your setup
PC This product is compatible with PC. Click label for more details.
PS Ready This product becomes compatible with PlayStation systems when combined with a PlayStation-licensed Wheel Base. Click label for more details.
XBox Ready This product becomes compatible with Xbox One and Xbox Series X|S systems when combined with an Xbox-licensed Steering Wheel. Click label for more details.

Ready to ship


Features

  • Plug and play pedals with throttle and brake pedal unit
  • Pedal units and heel rest made from solid Aluminum
  • Brake pedal with metal spring and PU foam damper for pressure braking simulation and more realism
  • Extra long pedals for more realism and comfort
  • Adjustable horizontal distance between pedal units, allows asynchronous setup
  • Ability to easily remove pedals from heelrest and install them together with the electronics in cockpits or stands seperately
  • 12bit resolution potentiometers
  • Heel rest offers large rest surface
  • Detachable rubber pedal covers offer good grip on soft surface
  • Direct connection to Fanatec Wheel Bases and Racing Wheels
  • USB connection to PC only via ClubSport USB Adapter (optional)
  • Upgradable by CSL Elite Pedals Loadcell Kit (optional)

Compatibility

Platforms

  • PC: The CSL Elite Pedals must be connected directly to the Wheel Base and do not come with an USB connector. For USB functionality you need to use a ClubSport USB Adapter or upgrade with the CSL Elite Pedals Loadcell Kit that comes with a PCBA replace and adds a USB connector as well as a handbrake port. For details please see the CSL Elite Pedals Loadcell Kit.
  • Consoles: This pedal set can be used on gaming consoles, if connected through a Fanatec Wheel Base / Racing Wheel. Please check the information on the product page of the Fanatec product through which they will be connected to the console. It will not work on consoles using a ClubSport USB Adapter.

Peripherals

Compatible to any Fanatec Wheel Base or Fanatec Racing Wheel with RJ12 Pedals connector. To connect Fanatec Wheels with PS/2 Pedal Socket, you need the additional PS/2 to RJ12 cable.


Special Notes

  • If you want to use this product standalone you need to purchase additional products (see compatibility).
  • Slight colour variations may occur between CSL Elite Pedals and CSL Elite Pedals Loadcell Kit.
  • Max resolution depending on the connection:
    • through CSW B V1 / CSW B V2 / CS WB V2.5 / CSL E WB / CSL E RW PS4: 12 bit (4096 values) on both axes
    • through ClubSport USB Adapter (not included, PC only): 8 bit (256 values) on both axes

Packaging Details

  • Dimensions (L x W x H) 47cm x 31cm x 18cm
  • Weight 4.5kg
  • Volume weight 5kg

What's included

  • Throttle pedal unit
  • Brake pedal unit with PU foam damper
  • Heel rest
  • 1x Wheel Base connection cable RJ12/RJ12 (~3m)
  • 2x rubber pedal cover (detachable)
  • 1x Wrench 13 mm (cropped)
  • 1x Allen Key 6 mm
  • 1x Quick Guide
  • Mounting screws

Technical Specifications

  • Platform PC, PS4 Ready, XBox One Ready
  • Vertically adjustable No
  • Color kit No
  • Max bits of resolution 12 (4096) on all axes
  • USB Connectivity With optional adapter
  • Adjustable brake stiffness and travel No
  • Sensors Potentiometer
  • Pedal pads Aluminium, Rubber
  • Adjustable pedal angle No
  • Horizontally adjustable Yes
  • Damper No
  • Throttle vibration No
  • ABS brake vibration No
  • Clutch pedal No
  • Adjustable brake sensitivity No
  • Load cell brake Optional
  • Main material Diecast Aluminium
  • Hardmount Bottom
Read, write and discuss reviews... more
Information

Driver (for PC)
As these are analog pedals, you will have to plug the pedals into a compatible Fanatec product with dedicated pedal port by RJ12 cable connection. Following this, there are no individual drivers for these pedals and the driver of the Fanatec product they are connected to will also support them. Please check and download the concerned driver, e.g. for your Fanatec wheel. 

 Drilling template - additional information:

1. When printing the Drilling Template at home, please make sure that the print size is 100% (file size = print size). Therefore deactivate "automatic page scaling" in the print dialog for example.
2. Before drilling the holes, please check if the hole marks on your printed Drilling Template fit to the screw holes of your pedals.

FAQ
Wheel bases not recognised in Steam games

Follow these steps to potentially solve the problem:

  1. Open the Steam application
  2. Select "View"
  3. Select "Settings"
  4. Select "Controller"
  5. In "General Controller Settings", uncheck the checkbox for "Generic Gamepad Configuration Support".

If the issue persists, reinstall the Steam Client.

Can I use my CSL Elite Loadcell kit without the foam ring? Titre : Puis-je utiliser mon CSL Elite Loadcell kit sans l'anneau en mousse ? ¿Puedo utilizar mi CSL Elite Loadcell kit sin el aro de esponja? Posso usare il mio kit CSL Elite Loadcell senza l'anello in spugna? Kann ich mein CSL Elite Pedals Loadcell Kit ohne den Schaumstoff Ring benutzen?

The CSL Elite Loadcell kit should only be used as shown in the manual.  

 

5 Rubber shores (65, 85 or 95) + Foam Ring + 5 washers (one after each rubber shore and foam ring) + one bushing + end stop. The sequence is also shown in the image below (it can also be found on the product page of the CSL Elite LoadCell kit https://fanatec.com/eu-en/accessories/pedal-accessories/csl-elite-pedals-load-cell-kit#downloads) 

 

 

 

Please know that the loadcell pedal is designed to be used as shown and explained above. Therefore, replacing the PU foam with another rubber shore, in order to make the pedal more sensitive, can damage it and it will not be covered by the warranty in case damage on the loadcell or pedal itself is caused.   

 

Le CSL Elite Loadcell kit doit être utilisé uniquement comme indiqué dans le manuel. 

 

5 rives en caoutchouc (65, 85 ou 95) + Anneau mousse + 5 rondelles (une après chaque rive en caoutchouc et Anneau mousse) + une douille + butée. La séquence est également montrée dans l'image ci-dessous (elle peut également être trouvée sur la page produit du CSL Elite LoadCellKit https://fanatec.com/eu-en/accessories/pedal-accessories/csl-elite-pedals-load-cell-kit#downloads) : 

 

Sachez que la pédale LoadCell Kit est conçue pour être utilisée comme indiqué et expliqué ci-dessus. Par conséquent, le remplacement de la mousse PU par une autre rive en caoutchouc, afin de rendre la pédale plus sensible, peut l'endommager et elle ne sera pas couverte par la garantie en cas de dommages sur le LoadCell Kit ou la pédale elle-même.

El kit CSL Elite Loadcell debe utilizarse únicamente como se muestra en el manual. 
 
5 partes de goma o elastómeros (65, 85 o 95) + 1 aro de espuma PU + 5 empaques o arandelas (una después de cada elastómero y anillo de espuma) + un buje + un tope final. La secuencia también se muestra en la imagen de abajo (también se puede encontrar en la página del producto del kit CSL Elite LoadCellhttps://fanatec.com/eu-de/accessories/pedal-accessories/csl-elite-pedale-loadcell-kit) : 

 

 

Tenga en cuenta que el pedal de la célula de carga está diseñado para ser utilizado como se muestra y se explicó anteriormente. Por lo tanto, la sustitución de la espuma de PU por otra orilla de goma, con el fin de hacer que el pedal sea más sensible, puede dañarlo, y no estaría cubierto por la garantía en caso de que se produzcan daños en la célula de carga o en el mismo pedal.   

Il kit CSL EliteLoadcell deve essere utilizzato solo come mostrato nel manuale.  

5 puntelli in gomma (65, 85 o 95) + anello in spugna + 5 rondelle (una dopo ogni puntello in gomma e anello in schiuma) + una boccola + battuta finale.La sequenza è mostrata anche nell'immagine sottostante (si trova anche nella pagina prodotto del kit CSL EliteLoadCellhttps://fanatec.com/eu-en/accessories/pedal-accessories/csl-elite-pedals-load-cell-kit#downloads):  

 

Tieni presente che il pedale della cella di carico è progettato per essere utilizzato come mostrato e spiegato sopra.Pertanto, la sostituzione della spugna in PU con un altro puntello in gomma, al fine di rendere il pedale più sensibile, può danneggiarlo e non sarà coperto dalla garanzia nel caso in cui si verifichino danni alla cella di carico o al pedale stesso.

Das CSL Elite Pedals Loadcell Kit sollte nur so verwendet werden, wie im Manual dargestellt. 

 

5 Elastomerfedern (65, 85 oder 95) + Schaumstoff Ring + 5 Beilagscheiben (eine nach jeder Elastomerfeder und dem Schaumstoff Ring) + Kappe + End Stop. Die Reihenfolge ist im Bild unten (Kann ebenfalls auf der Produktseite des CSL Elite Pedals Loadcell Kit https://fanatec.com/eu-en/accessories/pedal-accessories/csl-elite-pedals-load-cell-kit#downloads) zusehen: 

 

 

 

Bitte beachten Sie, dass das Loadcell Pedal darauf ausgelegt ist, nur so wie oben beschrieben verwendet zu werden. Daher kann das Ersetzen des Schaumstoff Rings durch eine weitere Elastomerfeder um mehr Sensitivität zu erlangen, das Pedal oder die Loadcell beschädigen. Ein durch diese Modifikation entstandener Schaden wird nicht durch die Garantie abgedeckt.

Can I mount my Fanatec device on a custom or 3rd party cockpit? Puis-je installer mon produit Fanatec sur un cockpit sur mesure d’une autre marque? Kann mein Fanatec Produkt an einem individuellen Cockpit oder an Cockpits von Drittherstellern montiert werden? Fanatec ????? ???????? 3rd ????? ?????????????????

Fanatec Cockpits or WheelStands are already prepared for quick and easy installation of Fanatec products. Additionally all Fanatec Wheels and nearly all Fanatec pedals (not possible for Porsche Wheel standard pedals) can easily be mounted on any type of custom or 3rd party cockpit solutions. There are integrated mounting holes in those products which can be used. Please download the drilling template to drill the right holes.

If you do use any 3rd party cockpit / rig / wheelstand product (e.g. Playsteats, Obutto, ...) please ask the production company about Fanatec product compatibilty.

Les cockpits et supports de volants Fanatec sont déjà prêts pour une installation rapide et facile de nos produits. Tous les volants et presque toutes les pédales Fanatec  (ce n'est pas possible pour les pédales standard de volant Porsche) peuvent également être montés facilement sur tous types de cockpits personnalisés. Il existe sur ces produits des trous de montage intégrés qui peuvent être utilisés. Veuillez télécharger le gabarit de perçage pour percer les trous appropriés. Si vous utilisez d’autres cockpits que les nôtres (par exemple Playseat) veuillez consulter la société de production concernant la compatibilité Fanatec.

Fanatec Cockpits und Wheelstands sind bereits für eine schnelle und stabile Montage von Fanatec Produkten vorbreitet. Zusätzlich können alle Fanatec Lenkräder und fast alle Pedale (ausgenommen: Porsche Wheel Standard Pedale) können problemlos, dank integrierter Montagegewinden, an individuellen Cockpit-Lösungen und Produkten von anderen Herstellern montiert werden. Bitte laden sie sich dazu die passenden "Drilling Templates" (= Bohrschablonen) herunter.

Um die Kompatibilität zu überprüfen kontaktieren sie bitte den Hersteller des Cockpits (bsp. Playseat, Obutto, ...).

Fanatec コックピット や wheelスタンド は素早く簡単にFantec製品が取り付け可能な状態で準備されています。加えてすべてのFanatecスてアリングとほぼすべてのペダル(Porsche Wheel standard pedals以外)は簡単にカスタム、またはサードパティーのコックピットにマウント可能です。製品にはマウントのための穴が取り付けられてています。 drilling templateをダウンロードの上ご使用ください。もしサードパティーコックピット、リグ、wheel standをご使用であればであればその製品サポートに弊社製品との互換性を問合せください。

 

More FAQs

Accessories