A - PACKAGE CONTENTS
A - 1x Podium Button Module Endurance
B - 6x M5x25mm countersunk bolts
C - 1x DataPort-C to RJ12 adapter (for use with the discontinued ClubSport Universal Hub for Xbox One)
D - 1x Endurance style sticker set
B - INTELLIGENT TELEMETRY MODE (ITM)
|
NOTE: Download and install the latest version of the Fanatec App and update your firmware for the best user experience. |
A small “ITM” icon in the bottom right of the BME display shows if ITM is accessible. To scroll through the screens, press and hold the Tuning Button while rotating the FunkySwitch left or right.
To access ITM on the Podium Wheel Base DD1 or DD2 display, press and hold the Tuning Button while pressing UP with the FunkySwitch, which will show the legacy screen and a small “ITM” icon in the bottom right if ITM is accessible. Scroll through screens by keeping the Tuning Button held down while pressing left or right with the FunkySwitch.
|
NOTE: ITM functions require the use of the Fanatec App on a Windows PC.
|
1 - Tuning Button
2 - FunkySwitch
C - CENTER CALIBRATION
If a center calibration is needed (for example after firmware update of the Base) when using the button module you need to press the tuning button as highlighted on the picture below to enter the Tuning Menu.
When Tuning Menu is active press the analogue stick and the FunkySwitch simultaneously to calibrate the wheel center.
1 - Tuning Button
D - SHIFTER CALIBRATION
To enter shifter calibration mode, simultaneously press the Tuning Button and the button highlighted below.
1 - Tuning Button
E - TUNING OPTIONS
To enter the Tuning Menu, press the Tuning Button. To navigate inside the menu, use the FunkySwitch. Press it up or down to access the five setups. Press the FunkySwitch right or left to go through the options and rotate the FunkySwitch to change option values.
1 - Tuning Button
2 - FunkySwitch
F - MODES
To switch between Base modes, simultaneously press and hold the two buttons highlighted below for one second.
G - ATTACHING TO THE PODIUM HUB
STEP 1
Align the Podium Button Module Endurance with the mounting holes of the Podium Hub.
STEP 2
Place a suitable Wheel Rim (e.g. UH R300, UH R911, UH R911S) on top of the Podium Button Module Endurance.
STEP 3
Use the longer mounting bolts (B) that are included in the Podium Button Module Endurance package and tighten down the Wheel Rim.
STEP 4
Connect the DataPort-C cable of the Podium Button Module Endurance to the connector on the bottom of the Podium Hub (highlighted below).
|
NOTE: The Podium Button Module Endurance is only suitable for Steering Wheels with a 6x70mm hole pattern.
|
H - ATTACHING TO THE CLUBSPORT UNIVERSAL HUB
|
IMPORTANT: All regular button clusters and FunkySwitch of the ClubSport Universal Hub must be removed before installing the Podium Button Module Endurance. Check the Quick Start Guide of your Hub for more detailed instructions.
|
H1 - ATTACHING TO THE CLUBSPORT UNIVERSAL HUB V2 (FOR XBOX)
STEP 1
Align the Podium Button Module Endurance with the mounting holes of the Universal Hub.
STEP 2
Place a suitable Wheel Rim (e.g. UH R300, UH R911, UH R911S) on top of the Podium Button Module Endurance.
STEP 3
Use the longer mounting bolts (B) that are included in the Podium Button Module Endurance package and tighten down the Wheel Rim.
STEP 4
Connect the DataPort-C cable of the Podium Button Module Endurance to the connector on the bottom of the Universal Hub (highlighted below).
|
NOTE: The Podium Button Module Endurance is only suitable for Steering Wheels with a 6x70mm hole pattern.
|
| NOTE: Steering Wheels of smaller diameters such as the UH R300 as well as third party rims may present tight spacing for fingers between the Podium Button Module Endurance and the rim's inner perimeter. |
| NOTE: To use the Podium Button Module Endurance with shifter paddles, they must be attached to the rearward set of mounting holes. |
H2 - ATTACHING TO THE CLUBSPORT UNIVERSAL HUB FOR XBOX ONE (DISCONTINUED)
| NOTE: The following steps 1 - 3 only apply when using the included DataPort-C to RJ12 adapter (C) for the discontinued ClubSport Universal Hub for Xbox One. |
STEP 1
Loosen the four bolts on the backside of the Universal Hub.
STEP 2
Open the front cover and connect the RJ12 to DataPort-C adapter to the RJ12 connector.
|
ATTENTION: Be careful to position the cable in one of the cable holes of the Universal Hub to avoid pinching the cable.
|
STEP 3
Close the front cover and tighten the bolts.
|
NOTE: To use the Podium Button Module Endurance with shifter paddles, they must be attached to the rearward set of mounting holes.
|
STEP 4
Align the Podium Button Module Endurance with the mounting holes of the Universal Hub.
STEP 5
Place a suitable Wheel Rim (e.g. UH R300, UH R911, UH R911S) on top of the Podium Button Module Endurance.
STEP 6
Use the longer mounting bolts (B) that are included in the Podium Button Module Endurance package and tighten down the Wheel Rim.
STEP 7
Connect the DataPort-C cable of the Podium Button Module Endurance to the adapter that was mounted before.
|
NOTE: The Podium Button Module Endurance is only suitable for Steering Wheels with a 6x70mm hole pattern.
|
|
NOTE: Steering Wheels of smaller diameters such as the UH R300 as well as third party rims may present tight spacing for fingers between the Podium Button Module Endurance and the rim's inner perimeter.
|
I - BUTTON MAPPING
| # | Button number PC | Function Xbox | Function PlayStation® |
| FS | D-pad left | D-pad left | D-pad left |
| D-pad right | D-pad right | D-pad right | |
| D-pad up | D-pad up | D-pad up | |
| D-pad down | D-pad down | D-pad down | |
| PUSH / 24 | A | Cross | |
| Rotation Clockwise / 23 | - | - | |
| Rotation Counter-clockwise / 22 | - | - | |
| AJ | rX | Right stick axis 0-center | Left stick axis X |
| rY | Left stick axis center-end | Left stick axis Y | |
| PUSH / 25 | HORN | Cross | |
| TS1 | UP / 33 | BRAKE | Game specific |
| DOWN / 31 | THROTTLE | Game specific | |
| TS2 | UP / 32 | BRAKE | Game specific |
| DOWN / 30 | THROTTLE | Game specific | |
| 1 | 7 | RB | L2 |
| 2 | 11 | LB | L3 |
| 3 | 06 | LT | R2 |
| 4 | 10 | XBOX GUIDE | PS |
| 5 | 08 | VIEW | SHARE |
| 6 | 02 | Y | TRIANGLE |
| 7 | 03 | B | CIRCLE |
| 8 | 00 | A | CROSS |
| 9 | 01 | X | SQUARE |
| 10 | 09 | MENU | OPTIONS |
| MP1 |
ENC: 48/49, MPS (pulse/const): 48-59 |
– | Game specific |
| MP2 |
ENC: 36/37, MPS (pulse/const): 36-47 |
– | Game specific |
| TUNING BUTTON | 27 | No output to game | No output to game |
J - WARRANTY
The product warranty is provided by CORSAIR MEMORY, Inc. Refer to the terms & conditions of CORSAIR MEMORY, Inc. on Fanatec.com.
K - LEGAL
©2026 CORSAIR MEMORY, Inc. Trademarks belong to their respective owners. All rights reserved. Fanatec is a brand of CORSAIR MEMORY Inc.